Manual DP-M02L

Installation Video

Instructions (Full Version)

Installation Steps In Picture 

*For your convenience and safety, please read the warning part in the full version before starting Installation

  • Put the gasket, cart wheels, gasket into the front axle in turn.
  • Insert the cotter pin into the hole of iron piece and bend it to fix it and the attach the wheel cover to the wheel.
  • Put the cart wheels, gasket into the rear axle in turn.
  • Insert the cotter pin into the hole of iron piece and bend it to fix it and then attach the wheel cover to the wheel.
Put the vehicle upside down.

 

Find the main power cord under the seat and insert the plug of the power cord into the corresponding jack of the receiver.
Attach the steering wheel.
  • Remove the nut and bolt from the steering wheel.
  • Connect the wires coming from the steering column to the wires on the steering wheel.
  • Insert the steering wheel over the steering and secure with nut and bolt.
Fix the seat
  • Stuck the seat buckle into the vehicle slot.
  • Press the seat switch to fix the seat.
Stuck the mirror into the windshield and fix it with M4*10 screws.
Stuck the windshield into the corresponding slot on the car body.